manualshive.com logo in svg
background image

ALIMENTATION ELECTRIQUE POUR FIXATION SUR RAIL-DIN

230 Vac 50-60 Hz / 12 Vdc -1 A

PSRD

MPF0203

V.04-2014 ::: Ind. A

S

E

N

T

I

N

E

L

FR

Manuel d’installation et d’utilisation

DÉCLARATION DE GARANTIE

PAR COURRIER
SCS SENTINEL - Service commande

Rte de St Symphorien - BP 69

85130 Les Landes génusson (FRANCE)

PAR INTERNET

scs-laboutique.com

DANGER OF ELECTROCUTION

Read carefully the following directions

Before the installing by the user of the power supply ref. PSRD, bellow called

« product or power supply », the consultation of these instructions is compulsory.
This product is not adapted for an external use. It must be mounted inside

an electrical and fi re enclosure in self-extinguishing material. It must not

be used in different environmental conditions and work ranges than the

ones indicated on the label.
To maintain class II product characteristic, respect the minimum distance (8 

mm) between the primary and the secondary terminations and between 

the primary terminations and any accessible metallic part. Before doing 

the connection, make sure that the power was turned off. Before making 

the installation, make sure the input clamps and the output clamps that are 

identifi able through a special label placed on the upper part of the power

supply are correctly positioned. For the connections, use cables and 

derivations with a section that does not exceed a current density of 4 A/

mm2 and add the right terminations. Make sure that all the terminal screws 

are tightly fastened. Connect to the AC mains supply each input pole by a 

readily accessible all-pole mains switch to provide a full disconnection under 

the II overvoltage category.

PRECAUTIONS

(The negligence can cause death and serious injuries).

 Do not connect the 

power supply with a not specifi ed input source. Do not connect the output 

clamps with the AC power source. Do not damage or crush the input wiring. 

Do not effect connections with wet hands. Do not short-circuit the clamps or 

the input and output wiring. Do not alter, open or perforate the power supply. 

Keep the power supply and the AC wires away from moisture or dust.

CAUTIONS

(The negligence can cause injuries or damage the ownership). 

Do not install 

or connect the power supply, while it is on: Electric shocks can occur and the 

device can get damaged. Before turning on the power supply, make sure 

that the wiring was not damaged or short-circuited. Flames or electric shocks 

can occur.

PROHIBITIONS

Do never install this product in one of the following places: danger of malfunctions, 

electric shocks or fi re: Where not authorized and not qualifi ed personnel 

has access. Places that are exposed to very low temperatures, under direct 

sunlight, near devices that temperature, in front of air conditioners, inside 

a refrigerated area, etc... Places that are exposed to humidity or extreme 

condensation, like bath rooms, cellars, greenhouses, etc... Places that are 

exposed to specifi c environmental conditions, like dust, oil, chemicals, salt, 

etc... Places exposed to continuous vibrations or impact. Places

exposed to warm stream or smoke (near heating equipments or cooking 

surfaces). Outdoors or in the rain.

i

Assistance téléphonique 

au 0 892 350 490 (0.34 € TTC la minute)

horaire, voir sur le site internet

scs-laboutique.com

FR

Содержание AAA0037











































Отзывы: