SCOV SV600 Series, Руководство пользователя, Страница: 120 / 198

7 Parameter Description SV600 Series User Manual
114
Function
code
Name
Setting range
Default Property
P6-15 Brake using rate 0% ~ 100% 100%
☆
It is valid only for the inverter with internal braking unit and used to adjust the duty ratio of the
braking unit. The larger the value of this parameter is, the better the braking result will be.
However, too larger value causes great fluctuation of the inverter bus voltage during the braking
process.
Function
code
Name
Setting range
Default Property
P6-18 Speed tracking current 30%~200%
Depends on
model
★
P6-21 Time of removing magnetic 0.00~5.00s 1.00s
★
P6-18 used to set the speed tracking current limit during speed tracking
.
Group P7: Keyboard and Display
Function
code
Name
Setting range
Default Property
P7-01 M key function selection
0: Invalid
1: Switchover between keyboard command
channel and remote command channel
(Terminal control or communication
control)
2: Switchover between forward and reverse
3: Forward JOG
4: Reverse JOG
3
★
M key is a multi-function key. The function of M key can be selected in P7-01.
0: Invalid
1: Switchover between keyboard command channel and remote command channel
(Terminal control or communication control)
When P7-01=1, pressing M key, the command channel would be sitched over to keyboard
control.
2: Switchover between forward and reverse
M key can switch over the rotaion direction. Only valid under keyboard control mode.
3: Forward JOG
M key used as Forward JOG run key.
4: Reverse JOG
M key used as Reverse JOG run key.