MG984G
Series
5
2.4 Camera Modes
The different modes are accessed by sliding the power
switch to the different positions marked on the
camera. The power switch is located inside the camera on
the
bottom
right
of
the
LCD
screen.
The different camera modes are as follows:
•
OFF Mode
Turns the camera off. The camera will still
consume a small amount of power while in OFF
mode. It is recommended to remove the batteries if the
camera will not be used for a long period of time.
•
TEST/SETUP Mode
In this mode, the camera allows you to customize the
camera settings or play back pictures and videos the
camera has taken on the LCD display.
•
ON Mode [ "Live" Mode ]
Camera will take pictures or video when motion is
detected and/or at specific time intervals,
according
to
your pre-programmed
settings.
After switching the camera to the ON position,
the red LED motion indicator will blink for
about 10 seconds and then turn off. This preset
time allows you to adjust the cameras position if
needed, before the camera becomes active.
