depending on the shoot. We’ve got you covered with 4 brass threaded
¼-20 attachment points as standard on the handles and even more for
some other add-ons such as the Deluxe Gimbal Base Extender.
You can attach off the centre with add-on mounts but my preference is to
keep my monitor and other accessories attached to the handles. When
hanging gear off the centre you add to the total 4th Axis payload but when
mounted off the handles those accessories don’t add to the 4th Axis
payload.
Here’s a few rigs ideas to give you an idea of what you can do (do a stop
motion orbit with the gimbal rotating)
●
Monitor left and gimbal remote right
●
Audio right top
●
Deluxe Gimbal Extender
●
light on top right
●
Audio on Gimbal Extender front with magic arm
Load Support
If you find you’re struggling on shoots holding
up your gimbal then a ‘Ready Rig’ style load
carrier system can be used (like the dual arm
one pictured) to connect to the attachment
points on the top of both handles. These
attachment points are extra reinforced for just
this purpose. Adding a ¼-20 eye bolt to each
handle will give you a perfect attachment point
for a mini snap carabiner for fast on and off.
26
User Guide - Glider Pro 3 Duo - 4th Axis Stabilizer - 20180917 ScottyMakesStuff.com
