Scott Safety Protege, Руководство пользователя

Страница: 26 / 104

2
CHAPTER 1: INTRODUCTION
087-0038 REV L SCOTT SAFETY
Device Overview
The Protégé comes with a long life rechargeable lithium-ion battery and sensors
already installed and ready for use. The Scott Gas Monitor (SGM) software allows
modification to the device’s settings or capture data from the device once it is
installed.
Depending on the sensors it is equipped with, the multi-gas personal device is
designed for monitoring the atmosphere for potentially hazardous levels of
combustible gases, oxygen enrichment or depletion, carbon monoxide, and hydrogen
sulfide.
Gas indication displays via a direct reading backlit LCD, multiple bright LEDs, a loud
audible alarm, and a vibratory alarm. The device includes a downloadable data log for
up to 7000 events and records STEL / TWA / PEAK exposures, calibrations, and gas
values. A built-in USB port on the charging module allows the device’s data log to be
downloaded and, when used with the device’s SGM software allows you to quickly
configure its operating and alarm parameters.
An optional Sample Draw Pump is available for remote sampling, an optional
Masterdock Docking Station is available for performing automatic Bump Testing and
Calibration, as well as an optional Multi-Charger that charges up to six (6) devices
simultaneously. The optional Multi-Charger does not need to interface with a PC.
The device ships preconfigured and ready for operation using the factory default
settings. However, you my want to reconfigure some of the parameters based upon
your application. See
“Configuring the Scott Gas Monitor Software” on page 23.
If you have any questions about the device or its operation contact Scott Safety. See
“Assistance” on page 68.
Figure 1 shows the major parts of the device.