Scotchman CPO 350, Руководство пользователя, Страница: 95 / 95

THERE ARE FOUR STYLES OF BLADES AVAILABLE:
STYLE 2: Has a round back tooth with a square face and top. This style is designed for thin wall,
nonferrous tubes, plastics and synthetics.
STYLE 2A: Is an alternate top bevel grind. This grind is used on blades that have 240 teeth or more.
Applications for this style are thin wall tubes, profiles with thin cross sections and nonferrous
applications that require 240 teeth or more.
STYLE 3: Is a triple chip grind with a high/low tooth form. This grind is used on blades that have
220 teeth or less. This style is used for a wide range of materials from solid sections of nonferrous
materials to heavy wall tubes and solid sections of steel and alloys.
POWER 2000: Is a notch grind blade designed for use on fully and semi-automatic machines with the
variable speed control, only. This style is designed for .100 wall or thinner tube with a minimum blade
speed of 170 RPM.
The stock blades listed above are oxide coated high speed steel. Ten inch (250mm) blades can be
provided with any number of teeth, from 50 to 280.
SERIAL #’S B8001 & UP PAGE 95
No high, No low, Power 2000 Blade Alternate Grind Triple Chip Grind
No bevel with Notch Grind
Plastic at
Low RPM .100 wall or thinner
with 170 RPM Thin wall tube
Low RPM Solid material &
thick wall pipe
Low RPM