manualshive.com logo in svg

Scotchman CPO-275, Руководство пользователя, Страница: 92 / 107

Поделиться
Скачать
Scotchman CPO-275 Скачать руководство пользователя страница 92

THERE ARE FOUR STYLES OF BLADES AVAILABLE:

STYLE 2: Has a round back tooth with a square face and top. This style is designed for thin wall,

nonferrous tubes, plastics and synthetics.

STYLE 2A: Is an alternate top bevel grind. This grind is used on blades that have 240 teeth or more.

Applications for this style are thin wall tubes, profiles with thin cross sections and nonferrous

applications that require 240 teeth or more.

STYLE 3: Is a triple chip grind with a high/low tooth form. This grind is used on blades that have

220 teeth or less. This style is used for a wide range of materials from solid sections of nonferrous

materials to heavy wall tubes and solid sections of steel and alloys.

POWER 2000: Is a notch grind blade designed for use on fully and semi-automatic machines with the

variable speed control, only. This style is designed for .100 wall or thinner tube with a minimum blade

speed of 170 RPM.

Page 91

FIGURE 40

Style 2

Style 2A

Style 3

Notch Grind

The stock blades listed on the previous page are oxide coated high speed steel. Ten inch

(250mm) blades and 10-3/4 (275mm) blades can be provided with any number of teeth,

from 50 to 280.

Содержание CPO-275












































































































Отзывы:

Нет отзывов