manualshive.com logo in svg

Scotchman AL150-HS, Руководство пользователя, Страница: 20 / 49

Поделиться
Скачать
Scotchman AL150-HS Скачать руководство пользователя страница 20

PAGE 20

                      MODEL - AL150-HS

REFER TO FIGURE 9

1.

Allen key, 8mm, with handle; for securing rotatable tubing clamp, for securing

           standard stopper, and for adjustment of grinding belt.

2.

 Allen bolts for opening and closing side cover. Use key with handle (1).

3.

 Allen bolt to adjust belt tracking. Use key with handle (1).

4.

 Hand Wheel for adjusting tubing clamp into and away from grinding roller.

5.

 Hand Wheel for adjusting tubing clamp side to side to grinding roller.

6.

 Handle for clamping work-piece in tubing clamp.

7.

 Allen bolt for securing rotatable clamp. There is another bolt (not shown) in the center of the

            clamp that also must be loosened & tightened to adjust the clamp. Use key with handle (1).

8.

Grinding Roller Support - Held in place by (2) wing-nuts.

9.

Hand Wheel used to adjust Grinding belt tension.

5.1 MACHINE CONTROLS & ADJUSTMENTS

Содержание AL150-HS


















































Отзывы:

Нет отзывов