MODEL - AL100U-01
REFER TO FIGURE 7
1. Allen key, 8mm, with handle; for securing rotatable tubing clamp, for securing
standard stopper, and for adjustment of grinding belt.
2. Allen bolt (may be a knob) for opening and closing side cover. Use key with handle (1).
3. Allen bolt for securing grinding belt. Use key with handle (1).
4. Ball Handle for adjusting tubing clamp into and away from grinding roller.
5. Handle for adjusting tubing clamp side to side to grinding roller.
6. Handle for clamping work-piece in tubing clamp.
7. Allen bolt for securing rotatable clamp. There is another bolt (not shown) in the center of the
clamp that also must be loosened & tightened to adjust the clamp. Use key with handle (1).
5.1 MACHINE CONTROLS & ADJUSTMENTS
PAGE 19
ALMI
by