These machines have a white "CE" Decal on them that Identifies the machine and has other
important information such as machine Voltage, Hz, RPM, Weight & Year of Manufacture.
This Decal is located between the START STOP buttons and EMERGENCY STOP button on
the Support Pillar of the machine. Sect. 3.0 Figure 1 details the location. You will need this
information for ordering parts or service for the machine.
An example of what the CE Decal looks like below:
4.3 MACHINE IDENTIFICATION
PAGE 15
CAUTION: TO PREVENT DAMAGE TO THE MOTOR AND DANGER TO THE OPERATOR,
ALL ELECTRICAL CONNECTIONS MUST BE MADE BY A LICENSED ELECTRICIAN.
The AL100U-01 and AL100U-02 are available 240V and 440V Three Phase and 240V Single Phase. To
insure satisfactory machine performance, the supply voltage should be +/- 10% of the motor voltage
rating. Check the motor data tag for full load current requirements. The electrical diagram for the
motor is inside the cover of the motor box.
For electrical supply lines ten feet (3 m) or shorter, we recommend at least 12 and preferably, 10 gauge
wire. For longer supply lines, use at least 10 gauge and preferably, 8 gauge. We do not recommend
supply lines longer than twenty five feet (7.5 m).
POWER REQUIREMENTS:
Motor frame: 100L
MOTOR VOLTAGE FULL LOAD AMPS
230 10.6 Amps
460 6.1 Amps
230 (Single phase) 17.8 Amps
Motor power rating: Approx. 4hp Speed: 3500 RPM
KVA power rating: 3.4 KVA at 60 HZ.
Starting Current: 210% Full Load
4.4 ELECTRICAL REQUIREMENTS
ALMI
Motor
Type
AL 100U-02
Volt
230
Hz.
60
l/min
3420
Weight
210
2011
Sr.No.
Additionally, the machine serial number is
located on top of the tube clamp on the left side.