background image

IN-DASH INSTALLATION KIT FOR

SELECT 2006-UP FORD, LINCOLN, & MERCURY

VEHICLES

FD1432B

INTRODUCTION / PRELIMINARY

This premium installation kit is for Select 2006-UP FORD, MERCURY, & LINCOLN Vehicles. Included are all
the parts you need to mount your car stereo/cassette or CD player into your vehicle's dash. Refer to the
individual instruction in this manual to remove your vehicle's factory radio and assemble the kit.

CAUTION:

DISCONNECT YOUR VEHICLE'S NEGATIVE BATTERY TERMINAL BEFORE THE INSTALLATION TO HELP PREVENT
ELECTRICAL DAMAGE. WE RECOMMEND THE USE OF A VOLT/OHN METER OVER A TEST LIGHT TO CHECK WIRING.
A TEST LIGHT OR GROUNDED WIRE PROBE CAN CAUSE DAMAGE TO THE VEHICLE'S COMPUTER AND/OR
DIAGNOSTIC SYSTEMS. AVOID ALL FACTORY AIRBAG WIRING - AIRBAGS CAN ACCIDENTALLY DEPLOY CAUSING
SERIOUS INJURY OR DEATH.

NOTES:

• See your vehicle's instructions for any special tools your installation might require.

• Read all instructions accompanying your car stereo/cassette player for proper wiring and mounting

instructions.

FORD

2007-UP

  EDGE

2006-UP

  EXPLORER

2007-UP

  EXPEDITION

2006-UP

  FUSION

2008-UP

  SUPERDUTY PICK-UP

MERCURY

2006-UP

  MOUNTAINEER

2006-UP

  MILAN

LINCOLN

2007-UP

  NAVIGATOR W/ NAV

6217

MOUNTING

PANEL

6219
POCKET

6218

L&R BRACKET

MOUNTING BRACKET CONFIGURATIONS

USE THE SHADED MOUNTING TABS. CUT OFF THE REMAINING TABS AND DISCARD.

FIGURE 2

FIGURE 1

MOUNTING THE RADIO

ISO DIN MOUNT

1. Snap the 6218 L&R brackets to 6217 kit Panel.
2. Align the  pocket to the lower edge of the panel. Secure the

pocket to the 6218 mounting brackets with the (2) supplied
screws in the installation kit.

3. Mount radio to brackets with radios

supplied screws

1. Snap the 6218 L&R brackets to the 6217 kit panel
2. Align , position and bolt the aftermarket Double DIN-ISO

head unit to the 6218 mounting brackets. Use the hardware
supplied with the aftermarket Double DIN-ISO head
unit to secure the mounting brackets to the
aftermarket radio.

DOUBLE DIN MOUNT

DOUBLE DIN MOUNT

ISO DIN MOUNT

NOTE:

REAR SUPPORT AVAILABLE
SEPARATELY. REAR
SUPPORTING THE RADIO
ADDS TO THE INSTALLATION’S
STRUCTURAL INTEGRITY.

DIN RADIO

DBL DIN RADIO

REAR

SUPPORT

STRAPS

SCOSCHE STEREO INSTALLATION COMPONENTS

STEREO DASH KIT

Отзывы: