3D as easy as 2D
2. Gently pull out the tray from the tray slot.
3. Remove the memory card.
4. Insert the tray back into the tray slot.
NOTE
Do not remove the memory card while or during the device is
transferring or accessing information. Doing so may cause data loss or
corruption or damage the device or the memory card itself. Scoobe3D is
not responsible for losses that result from the misuse of damaged
memory cards, including the loss of data.
Controlling the touchscreen
● Do not allow the touchscreen to come into contact with other
electrical devices. Electrostatic discharges can cause touchscreen
to malfunction.
● To avoid damaging the touchscreen, do not tap it with anything
sharp or apply excessive pressure to it with your fingertips.
● The device may not recognize touch inputs close to the edges of
the screen, which are outside the touch input area.
● Leaving the touchscreen idle for extended periods may result in
afterimages (screen burn-in) or ghosting. Turn off the touchscreen
when you do not use the device.
● It is recommended to use fingers when you use the touchscreen.
9
Содержание 3D Scanner
Страница 3: ...3D as easy as 2D 2 IF Card Port ...