SCION
xB
2012 - RECEIVER ASSEMBLY RADIO UNIT
Preparation
Page 1 of 7 pages
Issue: A 03/03/2011
Part Number: PT546-00120,
PT546-00121
NOTE:
Part number of this accessory may not be
the same as the part number illustrated.
Kit Contents
Item #
Quantity Reqd. Description
1
1
Receiver Assembly Radio Unit
2
1
Owner’s Manual
3
1
Hardware Bag
4
1
Conversion Cable: USB
5
1
Conversion Cable : 28Pin
6
1
Conversion Cable : Antenna
Hardware Bag Contents
Item #
Quantity Reqd. Description
1
8
Bolt
(M5
8)
iPod Cable Contents
Item #
Quantity Reqd. Description
Additional Items Required For Installation
Item #
Quantity Reqd. Description
Conflicts
None
Recommended Tools
Personal & Vehicle
Protection
Notes
Vehicle protection
Blankets
Special Tools
Notes
USB Flash Drive Media
Must contain MP3 songs
Installation Tools
Notes
Panel Clip Removal Tool
e.g. Toyota SST P/N:-
00002-06002-01
Wrench
Open End, 10mm
Socket
10mm
Screwdriver
Phillips, #2
Torque Wrench
4.1 N·m (36 lbf ·in)
Masking Tape
(2’’ wide)
Special Chemicals
Notes
None
General Applicability
All Scion xB
Recommended Sequence of Application
Item #
Accessory
*Mandatory
Vehicle Service Parts
(may be required for reassembly)
Item #
Quantity Reqd. Description
Legend
STOP:
Damage to the vehicle may occur. Do not
proceed until process has been complied with.
OPERATOR SAFETY:
Use caution to avoid risk of
injury.
CAUTION:
A process that must be carefully observed
in order to reduce the risk of damage to the
accessory/vehicle and to ensure a quality installation.
TOOLS & EQUIPMENT:
Used in Figures calls out the
specific tools and equipment recommended for this
process.
REVISION MARK:
This mark highlights a change in
installation with respect to previous issue.
SAFETY TORQUE:
This mark indicates that torque is
related to safety.
