1
Safety Precautions
•
Ensure that the label indicated the correct voltage before connecting the device
to power supply.
•
Ensure good working environment free of explosive, hazardous and
inflammable substances. This product is intended for indoor use only.
•
The instrument should be placed in a low humidity, less dust, water free
environment without the perpendicular incidence of sunshine and intense light
source.
•
The instrument should be placed in a well-ventilated, free of corrosive gases or
strong magnetic interference, far away from heating gas, fire and all other heat
sources, and not less than 700 mm from other objects or equipments affecting
ventilation.
•
Ensure that the instrument and its accessories are free of any potential defects.
•
Ensure that the instrument is secured tightly and standard accessories supplied
by the manufacturers only should be used.
•
Wear proper protective equipment while operating this instrument to prevent the
potential dangers associated with the risk of splashing/ release of toxic or
inflammable gases.
•
The power cable must be kept away from the surface of heating module rather
than shield the device.
•
Please prevent water from splashing on the electrical elements of the product.
•
The power supply is fully disconnected only if the power plug is pulled out.
•
Before assembly, disassembly, cleaning or maintenance, the main power plug
must be pulled out.
Caution!
•
Please carefully read the manual before operating the product, and
observe the specifications on safe operation.
•
Ensure that only trained staff operates this product.
Ground protection for safety!
•
Ensure that the power socket has been properly grounded before
operating the product
