scigiene SP-850048, Инструкция по эксплуатации

Страница: 12 / 31

PAGE 12
SETUP
This meter has the advanced setup mode which allows you to customize and check
your meter’s preferences and defaults. If you would like to change the parameters,
please press “SET” for more than 2 seconds to enter the setup mode when the meter
is in the measurement mode.
NOTE:
To exit the function without saving in the setup mode, press the CAL/ESC key until the
measurement mode
appears. If the meter is under the setting value status, press the CAL/ESC key twice to
exit.
The table below shows the programable functions of each probe.
Parameters PH COND DO
P10 Memory Clear-CLr adjustable V V V
P20 PH Electrode Slope Review V
P30 Cond. Calibration Review V
P40 Cond. Cell Constant Review V
P50 Tds factor adjustment V
P60 DO Review and Set parameters adjustable V
P70 Temperature unit setting adjustable V V V