31
/57
T.RUN
Timer Run
Allows you to define the behavior of the temperature control at the end of the
T1
+
T2
timers.
on
– The temperature control continues to operate
off
– Temperature control will be disabled at the end of the timer (
RUN
=
No
).
Table 14
–
Timer cycle
4.3.10 CALIBRATION CYCLE (
CFG
>>
CaLib
)
This is the Calibration Cycle:
Calibration cycle
The inputs and outputs are factory calibrated. If necessary, recalibration must be performed by a specialized professional. If you access this
cycle by accident, just go through all the parameters, avoiding changing their values
.