manualshive.com logo in svg

SCIEX X500 QTOF, Руководство пользователя системы

Поделиться
Скачать
SCIEX X500 QTOF Скачать руководство пользователя страница 54

Remove a User

Use this procedure to remove a user from the software. If a user is removed from Microsoft Windows, then the
user must also be removed from the SCIEX OS .

1. Open the Users workspace.

2. Click the user or group in the 

Users

 list.

3. Click 

Remove User

.

Enable Full Screen Mode

Select this feature to use the SCIEX OS software as the primary application. Users cannot close the software or
access other software programs.

1. Open the Configuration workspace.

2. Click 

General

 in the left panel.

3. Under 

General

, select 

Enable

 to enable 

Full Screen Mode.

4. Click 

Save

.

Select Laboratory Information Management System
(LIMS) Settings

Use this feature to connect to an LIS server. Users can import batch information from, as well as export results to,
an LIS.

1. Open the Configuration workspace.

2. Click 

LIMS Communication

 in the left panel.

3. Type the server address in the 

LIMS Server

 field.

4. Select the 

Enabled

 check box.

5. Click 

Save

.

Select Queue Options

The queue goes one-by-one through the submitted list of pending samples or manually submitted samples, running
each sample with the selected acquisition method. After all of the samples have been acquired, the queue stops
and the system goes to the Ready state. After the time set in the Instrument Idle Time field has elapsed, the system

System User Guide

SCIEX X500 QTOF System

RUO-IDV-05-2334-E

54 / 234

Configure Access to the Software

Содержание X500 QTOF











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды