manualshive.com logo in svg

SCIEX X500 QTOF, Руководство пользователя системы

Поделиться
Скачать
SCIEX X500 QTOF Скачать руководство пользователя страница 134

If the 

Only show this dialog again if the Shift key is down

 check box is selected, then the selected

action is always used unless the user holds the 

Shift

 key to change the option.

Subset Data (to Graph Selection)

This feature is only available when a graph with exactly one selected region is active. Removes data points lying
outside the selected region. Use this feature to focus data processing on a subset of the entire data.

1. Open the Explorer workspace.

2. Click 

File > Open Multiple Samples.

Figure 6-36 File Menu—Options

3. In the Select Samples dialog, select the samples from the 

Available

 list and then click the arrow to move the

files to the 

Selected

 list.

Tip! 

To select one sample, expand the file, click the sample, and then click the arrow.

4. Click 

OK

.

5. Make a selection in the graph.

6. Click 

Process > Subset Data (to graph selection).

If the active graph contains overlaid series from different samples, then the Process All Overlays? dialog opens.

System User Guide

SCIEX X500 QTOF System

RUO-IDV-05-2334-E

134 / 234

Operating Instructions—Software

Содержание X500 QTOF











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды