Scientific 5000 Series, Руководство пользователя

Страница: 99 / 360

6
– PC SOFTWARE
MODEL 5000 SERIES MANUAL
Version 1.23
6-35
COMMAND PACKET USAGE
X U <sta> J<bin>,<count> Set the specified alarm
bin (must be exactly 2
characters, e.g. “04”) to
the specified count for
the specified station
X U <sta> M Save Sort Counters for
the specified station
X U <sta> N Restore Sort Counters
for the specified station
X U <sta> Z Read current settings
(see Notes)
Z NULL NULL SYSTEM TEST Run self-test.
Z NULL NULL SYSTEM BLOCK<block> Run the specified self-
test block.
Z NULL NULL LODECK TEST Run Lo Deck test
Z NULL NULL LODECK BLOCK<block> Run the specified Lo
Deck block.
Table 6-1 Communication Commands to 5000 Series Tester
NOTES:

The command packet must always be exactly forty-eight bytes long.

All unused characters should be set to NULL (0x00).

All characters must be upper case and exactly as shown, including spaces.

Numbers, if required, must follow the COMMAND STRING without any
spacing in ASCII format.

Checksum must be computed as follows (must have the CRC Table
available from Scientific Test Inc.):
void init_crc32( unsigned long *crc )
{
*crc = 0xffffffff;
}
void update_crc32( unsigned long *crc, unsigned char ch )
{
int k;
k = ( *crc ^ ch ) & 0x000000ffL;
*crc = (( *crc >> 8 ) & 0x00ffffffL ) ^ crc32_table[k];
}

System configuration data, from the STI 5000 Series Tester, is as follows:
o
0x04
o
„1‟ or „2‟ for 5300HX or 5000E
o
„1‟, „2‟ or „4‟ for 50V High Source, 75V High Source or 100V High
Source
o
„1‟ or „2‟ for 20V Low Source or 80V Low Source
o
„0‟ or „1‟ for Low Source 40A Option
o
„0‟ or „1‟ for Kelvin Switch Setting
o
„0‟ or „1‟ for Low Deck Switch Setting
o
„0‟ or „1‟ for High Deck Switch Setting
o
„0‟ or „1‟ for 2KV Option
o
„0‟, „1‟ or „2‟ for Multiplexer, No Mux Option („0‟), 3 Station Multiplex
(„1‟) or 4 Station Multiplex („2‟)
o
„0‟ or „1‟ for MOV2500 Option