Scientific Industries TORBAL FB Precision Series, Инструкция по эксплуатации, Страница: 72 / 85

70
Instruction Manual
– FB and FC Series Force Gauges
Hex key Clamp
This chrome-plated hex key vise clamp is ideal when performing peel testing, or gripping thin material such as film, paper, or foil. The vise is equipped with an
adjustable hex key screw and interlocking claps which allow for secure sample griping without damage.
C-Clamp
This chrome-plated manual C-Clamp is designed to secure samples on the testing stand. The clamp also easily attaches to the force gauge and it is ideal for
making measurement on wide range of sample shapes and sizes. This attachment should be used when testing samples that need to be gripped over a large
surface area.
Roller Grip
The roller grip attachment is used when measuring tape strength as well as tape adhesives. The grip is ideal for testing any sample that needs to be draped to
obtain an accurate force measurement.
Two-Grip Handle
The two-grip handle adapter
is especially useful when
performing force
measurements between 200N
and 500N. The handle
securely mounts the force
gauge meter allowing users a
comfortable and firm grip
when pulling or pushing
objects that require extensive
force.
Hook Plate
The hook plate allows the TORBAL force gauges
to be securely suspended in a hanging position.
The hook can be used on all FA models with
built-in load-cells. Hanging the force gauge is
particularly useful when measuring articles
which must be hung on the force meter to
measure downward pull forces.
Chapter 21: Accessories
Chapter 26: Replacement PartsChapter 25: Accessories
Chapter 22: Replacement Parts
Chapter 27: Limited WarrantyChapter 26: Replacement PartsChapter 21:
Accessories
Chapter 26: Replacement PartsChapter 25: Accessories
Chapter 22: Replacement Parts
Chapter 27: Limited WarrantyChapter 26: Replacement Parts