background image

30 

 

734348 Rev C 

 

Where Do I Place My Modem for Telephone Service? 

 

Where Do I Place My Modem for Telephone Service? 

Where Is the Best Location for My Modem? 

When choosing a location for your modem, consider the following 
recommendations: 

 

 

Choose a location close to your computer if you will also use the cable modem 
for high-speed Internet service. 

 

 

Choose a location that is near an existing RF coaxial connection to eliminate the 
need for an additional RF coaxial outlet. 

 

 

Choose a location for the cable modem that is adjacent to your telephone 
equipment if you are using only one or two pieces of telephone equipment. 

Note:

 If you are using the cable modem to provide service to several telephones, 

a professional installer can connect the cable modem to your existing home 
telephone wiring. To minimize changes to the home telephone wiring, you may 
want to locate the cable modem near an existing telephone outlet. See 

How Do I 

Install the Modem for Telephone Service?

 (on page 32), for further instructions. 

 

 

Choose a location that is relatively protected from accidental disturbance or 
harm, such as a closet, basement, or other protected area. 

 

 

Choose a location so that there is plenty of room to guide the cables away from 
the modem without straining or crimping them. 

 

 

Airflow around the cable modem should not be restricted. 

 

 

Read this user's guide thoroughly before installing the cable modem. 

 

Содержание DPX2213





















































Отзывы: