13
11. Install Batteries in Console
Note:
The console uses D size batteries (LR20). Make
sure that the batteries point in the direction
of the +/– indicators in the battery bay. If you
use rechargeable batteries, the optional power
adapter will not recharge the batteries.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or
rechargeable (Ni-Cd, Ni-MH, etc) batteries.
X4
+
–
Optional Power Adapter
The console for your machine can operate on battery power or AC power. For AC power, it is necessary to order the
optional Power Adapter. If batteries and the Power Adapter are installed, the console will use the Power Adapter to operate.
Note:
If you use rechargeable batteries, the optional Power Adapter will not recharge the batteries.
After the machine is fully assembled, connect the Power Adaptor to the console and the wall outlet.
NOTICE:
If you use a power adapter for your bike, make sure that the cord stays clear of the path of the pedals.
Attach the cord to the machine with zipties as shown:
NOTICE:
It is recommended to remove batteries when they are not used, to avoid damage from battery corrosion.
To order the optional Power Adapter, go to: www.schwinnfitness.com/powersupply
Or call 1 (800) 605–3369.
12. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Be sure to record the serial number in the field provided at the front of this manual.
Do not use or put the machine into service until the machine has been fully assembled and inspected for correct
performance in accordance with the Owner’s Manual.
