Technical Procedure
Page 1
637-8642 Rev. A
Latest Rev.
Service Manual
Links
Generator Belt Replacement
Applies to: AC Power (9-7300)
Required Tools:
• #2 Phillips Screwdriver
• 9/16” Socket
• 10mm Deep Socket
1. Use a #2 phillips screwdriver to remove the screw securing
the right side flywheel cap to the bike, then remove the
cap.
2. Use a #2 phillips screwdriver to remove the screws securing
the left generator cover to the bike
3. With the left generator cover removed, use a screwdriver to
remove the screw hidden by the generator board, angled
as shown.
