34
Condition/Problem
Things to Check
Solution
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly. Small
latch on connector should line up and snap into place.
Reset Machine
Unplug unit from electrical outlet for 3 minutes. Reconnect to
outlet.
Check magnet position
(requires shroud removal)
Magnet should be in place on pulley.
Check Speed Sensor
(requires shroud removal)
Speed sensor should be aligned with magnet and connected to
data cable. Realign sensor if necessary. Replace if there is any
damage to the sensor or the connecting wire.
Unit rocks/does not sit
level
Check leveler adjustment
Adjust levelers until bike is level.
Check surface under unit
Adjustment may not be able to compensate for extremely uneven
surfaces. Move bike to level area.
Pedals loose/unit difficult
to pedal
Check pedal to crank arm
connection
Pedal should be tightened securely to crank. Insure connection is
not cross-threaded.
Clicking sound when
pedaling
Check pedal to crank arm
connection
Remove pedals and reattach.
Seat post movement
Check locking pin
Be sure adjustment pin is locked into one of the seat post adjust-
ment holes.
Check adjustment knob
Be sure knob is securely tightened.
