Schweitzer Engineering Laboratories SEL-311L, Инструкция по эксплуатации, Страница: 194 / 734

5-18 Trip and Target Logic Date Code 20010625
SEL-311L Instruction Manual
Figure 5.7: Permissive Input Logic Routing to POTT Logic
Also note that SEL
OGIC
control equation setting PT1 in Figure 5.9 is routed to control Relay
Word bit PTRX if enable setting ECOMM = POTT. Relay Word bit PTRX is the permissive trip
receive input into the trip logic in Figure 5.4.
Timer Settings
See Section 9: Setting the Relay for setting ranges.
Z3RBD—Zone (Level) 3 Reverse Block Delay
Current-reversal guard timer—typically set at 5 cycles.
EBLKD—Echo Block Delay
Prevents echoing of received PT for settable delay after dropout of local permissive elements in
trip setting TRCOMM—typically set at 10 cycles. Set to OFF to defeat EBLKD.
ETDPU—Echo Time Delay Pickup
Sets minimum time requirement for received PT, before echo begins—typically set at 2 cycles.
Set to OFF for no echo.
EDURD—Echo Duration
Limits echo duration, to prevent channel lockup—typically set at 4.0 cycles.
Logic Outputs
The following logic outputs can be tested by assigning them to output contacts. See Output
Contacts in Section 7: Inputs, Outputs, Timers, and Other Control Logic for more information
on output contacts.