Schwaiger DAB 200, Инструкция по эксплуатации

Страница: 18 / 24

18
USER MANUAL DAB 200
3. Press the ENTER button, use the or button to find <Time> and press ENTER button. Inside
the <Time> menu, there are the options:
• <Set 12/24 Hour>
• <Set Time/Date> • <Auto Update>
• <Set Date Format>
<Set 12/24 Hour>
Use the or button to select 12 or 24 hour mode and then press the ENTER button to acti-
vate.
<Set Time/Date>
When activated the hour digit flashes. Use the or button tos et the digit to the correct
hour, then press ENTER. Repeat for the minutes again pressing ENTER when set. The process
for setting the date is exactly the same as the above. Press ENTER button to finalise the setting
once complete.
<Auto Update>
Use the or button to cycle through the various options for auto setting the time & date. You
can select between these sources/options : <Update from any>, <Update from DAB>,<Up-
date from FM> and <No Update>.
<Set Date Format>
Use the or button to cycle through the two options for setting the format of date. You can
select between <DD-MM-YYYY> and <MM-DD-YYYY>.
Note! When the power is switched OFF (not standby) the settings will be lost.
Then the time will be updated from the first radio stations which is
received if switched on.
5.4 Alarm setting
You can use your radio as an alarm clock which wakes you up with your favorite radio station.
1 Press and hold the INFO/MENU button for 3 seconds.
2. When the <Full scan> option appears press either or and find <System>.
3. Press the ENTER button,use the or button to find <Alarm> and press the ENTER
button.
Alarm Setup
Press the ENTER button to initiate the setup process.
1. Use the or button to select Alarm ON or OFF then press ENTER to activate.
2. Use the or button to set the Alarm on hour digits. Press ENTER to set.
3. Set the minute digits the same way as the hour digits. After setting, press ENTER button
to save.
4. There is an option to only have the alarm activate on WEEKDAYS, DAILY, ONCE or
WEEKENDS. Choose which you require using the or button. Press the ENTER button
to store the setting.