Schwaiger DAB 200, Инструкция по эксплуатации

Страница: 17 / 24

17
USER MANUAL DAB 200
* DLS (Dynamic Label Segment)
Dynamic Iabel segment is a scrolling message that the broadcasters may include with their
transmissions. This message usually includes information, such as program detail etc.
** Ensemble/Multiplex
A multiplex/ensemble is a collection of radio stations that are bundled and transmitted on one
frequency. There are national and local multiplexes. DAB - unlike analogue FM radio - groups
together several radio stations and transmits them on one frequency.
4.5 Secondary services
On some occasions you will see a “>”-symbol directly after the name of the station. This in-
dicates that there are secondary services available to that station. These secondary services
contain extra services that relate to the primary station ,e.g. a sports station may want to add
extra commentaries. The secondary services are inserted directly after the primary station.
5. SYSTEM SETTINGS
5.1 Language
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Full scan> option appears press one of the buttons repeatedly until you
find <System>, then press the ENTER button.
3. Use or to find the <Language> option and press ENTER. Choose the desired langua-
ge by using or and press ENTER to store.
5.2 Backlight
In this menu you can alter the dimming of the backlight. You can select if it is dimmed in stand-
by mode and after which time it is dimmed when used.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Scan Setting> option appears press one of the buttons repeatedly until
you find <System>, then press the ENTER button.
3. Use or to find the <Backlight> option and press ENTER to find <time out>.
4. Press the ENTER button to enter <time out> and choose the available time <10 sec>,
<20 sec>,<30 sec>,<45 sec>,<60 sec>,<90 sec>,<120 sec>, <180 sec> or
<ON>. ON means that the display is always on.
You can also adjust if the <On level> or <Dim level> is <low>, <medium> or <high>. You
choice is stored by pressing ENTER.
5.3 Time & Date
The time and date can be updated automatically (default) or manually.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Full scan> option appears press either or button and find <System>.