Start-up
05.00 | WSG 25 | Assembly and Operating Manual | en | 389684
29
6.2 Changing the IP address and using DHCP
To change the product’s IP address, in the web interface, select
the
Settings -> Network
option menu. Adjust the IP address,
subnet masks and any gateway or DNS server addresses for your
local network and confirm the changes by clicking on the “Apply“
button.
NOTE
After changing the network configuration you will have to restart
the product.
To use addresses dynamically assigned via DHCP, check the
corresponding box. In this case the product will automatically take
its network configuration from a DHCP server.
NOTE
Please note that if you use DHCP to dynamically allocate IP
addresses, there is no integrated way of finding out what IP
address has been allocated. This is why the DHCP server should be
config-ured so that the product is issued with an IP address which
is known in advance
For further information, please contact your network
administrator.
