SCHUNK VERO-S, Сборка и руководство по эксплуатации, Страница: 10 / 74

Basic safety notes
10 03.00|WDP-5X |en
Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
• Use only original spare parts or spares authorized by SCHUNK.
Environmental and operating conditions
Required ambient conditions and operating conditions
Incorrect ambient and operating conditions can make the product
unsafe, leading to the risk of serious injuries, considerable material
damage and/or a significant reduction to the product's life span.
• Make sure that the product is used only in the context of its
defined application parameters,
(

3, Page 20) .
• Make sure that the product is a sufficient size for the
application.
• Make sure that the contact surfaces of the interface are always
clean.
• Make absolutely sure that no chips of any kind can enter the
interface and that the interface does not fill with cooling
emulsion, which is particularly possible with vertical positioning
of the clamping pin axis. The best way to ensure both of these
is to use the SDE protection covers. If the interface should fill
with cooling emulsion, initiate the unlocking process and dry
out the interface in actuated state.
• Only use high-quality cooling emulsions with anti-corrosive
additives during processing.
2.4
2.5