Operation
02.00|WDB 99 |en
49
Operation
WARNING
Risk of injury due to losing pallets or workpieces in the case of
incorrect actuation caused and by means of turning application.
• The danger zone must be surrounded by a protective enclo-
sure during operation.
• Do not use the clamping systems on the lathes.
• The clamping systems are only permitted for stationary
applications with low turning and rotational motions of the
clamping structure.
WARNING
Risk of injury due to falling parts during transport of the quick-
change pallet system, when the axis of the clamping pin is in a
horizontal position, or in the case of overhead application
• Use a crane for transportation.
• In the case of overhead application, or if the system is in a
horizontal position, secure the pallets or workpieces so that
they do not fall when releasing the clamping module.
WARNING
Risk of injury due to losing pallets or workpieces if the supply
of compressed air drops or fails, and due to the clamping pins
immediately closing
• Do not reach into the clamping module.
• Use pressure maintenance valves.
• Use loading devices.
CAUTION
There is a risk of limbs being crushed by moving parts during
manual loading and unloading and the clamping procedure.
• Do not reach into the clamping pin holder.
• Use loading devices.
• Wear protective gloves.
NOTICE
For manual loading and unloading of workpieces using a crane,
there is a danger of damage to the clamping systems by tilting.
When manually loading and unloading, do not tilt the workpiece
clamping structures.
7
