SCHUNK SWS-001, Инструкция по установке и эксплуатации

Страница: 30 / 40

Maintenance
30 01.00|SWS-001 |en
NOTICE
Special grease to lubricate the locking mechanism.
Tubes of lubricant for this purpose are shipped with every Tool
Changer.
• Use MobilGrease® XHP222 Special grease.
MobilGrease® XHP222 Special is a NLGI #2 lithium complex
grease with molybdenum disulfide.
5 No application of lubrication is necessary on the SWK compo-
nents.
Rubber O-ring Inspection and Replacement
Rubber O-ring Replacement
1 The rubber O-ring seals the air passage from the SWK to the
SWA. If the O-rings become cut or damaged they need to be
replaced.
2 Remove damaged rubber O-ring by pinching with finger tips or
prying with finger nail and pulling the O-ring out of the body.
3 Dip new O-ring in water to aid in installation.
4 Insert the rubber O-ring into the bore.
5 Press the O-ring in by hand until it is seated completely in the
bore.
8.3