SCHUNK STM 48V, Сборка и руководство по эксплуатации

Страница: 11 / 80

Basic safety notes
05/STM-48V/en/2011-04-01/CW 11
2.3 Controlled production
The module represents the state of the art and the recognized
safety rules at the time of delivery. However, it can present risks
if, for example:
•
The module is not used in accordance with its intended
purpose.
•
The module is not installed or maintained properly.
•
The EC Machinery Directive, the VDE directives, the safety
and accident-prevention regulations valid at the usage site, or
the safety and installation notes are not observed.
2.3.1 Protective equipment
When the module is in use, protective equipment must be used to
catch flying parts or to switch the drive into a safe mode should
the module or part of the module fail.
The protective equipment must comply with the requirements of
the EC Machinery Directive and IEC/EN 60204-1.

The STM's housing must be grounded via the controller.
2.3.2 Special standards
The following harmonized standards were adhered to:
•
Industrial scientific and medical (ISM) radio-frequency
equipment - Electromagnetic disturbance characteristics -
Limits and methods of measurement (IEC/CISPR 11:2003 +
A1:2004, mo A2:2006); German version
EN 55011:2007 + A2:2007 class A (this is equivalent to EN
61000-6-4:2004)
•
Electromagnetic compatibility (EMC) - Part 6-2: Generic
standards - Immunity for industrial environments (IEC 61000-
6-2:2005); German version EN 61000-6-2:2005
2.3.3 Constructional changes, attachments, or modifications
Additional drill holes, threads, or attachments that are not offered
as accessories by SCHUNK may be attached only with permis-
sion of SCHUNK.
Non-authorized modifications results in the exclusion from prod-
uct liability.