SCHUNK STM 48V, Сборка и руководство по эксплуатации

Страница: 69 / 80

Maintenance and care
05/STM-48V/en/2011-04-01/CW 69
14 Maintenance and care
14.1 Maintenance and lubrication intervals
DANGER
Risk of fatal injuries due to electric shock
If the electrical connections are released from the live module,
arcing may be the result.

Switch off the energy supply.

Only have work on the module performed by appropriately
trained specialist personnel.
NOTICE
If the operating temperature in the motor's winding exceeds
60° C, the lubricants will harden faster.

Lubrication and maintenance works have to be carried out
more often.
We recommend that maintenance and seal replacement is done
by SCHUNK because the rotor must be aligned and assembled
with an assembly device.
Type STM 48V
Bearing lubrication Interval [h] 20.000
Visual inspection [h] 2.500
Table 43
This information refers to the use of the STM under normal oper-
ating and ambient conditions:
•
Clean workshop atmosphere
•
No splashing water
•
Small amounts of abrasive and process dust
14.2 Module Servicing
For maintenance work or repairs, send the complete module
along with a repair order to SCHUNK.
Maintenance
intervals