SCHUNK STM 48V, Сборка и руководство по эксплуатации

Страница: 12 / 80

Basic safety notes
12 05/STM-48V/en/2011-04-01/CW
2.3.4 After-sales service
SCHUNK's after-sales service is available for technical informa-
tion and questions concerning SCHUNK products.

Call the contact. (see chapter 18, page 78)

State the ID of the module. (see chapter 6.1, page 20)
2.4 Obligations of the manufacturer/operator
2.4.1 Choice of personnel and personnel qualifications
Work on the module may be carried out by authorized personnel
only. The legal minimum age must be observed.
The assembly, commissioning and repair of the module may be
performed only by trained specialist personnel who have been
instructed how to perform the said work activities.
The manufacturer/operator must ensure that the personnel are
adequately and appropriately trained to perform work on the
module assigned to them.
2.4.2 Organizational measures

Make sure that at least one copy of this manual is kept in the
direct vicinity of the machine/system where the module is
installed, and that it is accessible for the relevant persons.

Ensure that personnel have read and understood this manual,
especially chapter 2 "Basic safety notes".

Provide instructions about and observe the safety and
accident-prevention regulations that apply at the site of use.

Provide instructions about and observe the environmental
protection regulations that apply at the site of use.

Provide protective equipment.
 Check the personnel’s conduct regarding the awareness of
safety and hazards from time to time.
2.4.3 Disposal

Send components of the module for recycling or properly
dispose of them according to the local regulations.