manualshive.com logo in svg

SCHUNK SRH-plus-D, Сборка и руководство по эксплуатации

Поделиться
Скачать
SCHUNK SRH-plus-D Скачать руководство пользователя страница 6

General

6

03.00 | SRH-plus-D | Assembly and Operating Manual | en | 1424337

• Assembly and operating manuals of the accessories *
The documents labeled with an asterisk (*) can be downloaded
from 

schunk.com

.

1.1.4 Sizes

This operating manual applies to the following sizes:
• SRH-plus-D 20
• SRH-plus-D 25
• SRH-plus-D 30
• SRH-plus-D 35
• SRH-plus-D 40
• SRH-plus-D 50
• SRH-plus-D 60

1.1.5 Variants

This operating manual applies to the following variations:
• SRH-plus-D with electrical feed-through (EDF) and lateral cable

outlet

1.2 Warranty

If the product is used as intended, the warranty is valid for 24
months from the ex-works delivery date under the following
conditions:
• Observe the specified maintenance and lubrication intervals
• Observe the ambient conditions and operating conditions
Parts touching the workpiece and wear parts are not included in
the warranty.

Содержание SRH-plus-D

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды