manualshive.com logo in svg

SCHUNK SPG 100, Сборка и эксплуатационное руководство

Поделиться
Скачать
SCHUNK SPG 100 Скачать руководство пользователя страница 25

Maintenance

02.00 | SPG 100 | Assembly and Operating Manual | en | 0389423

25

6 Maintenance

6.1 Notes

Exchange of housing and base jaws

The base jaws and the guidance in the housing are matched. To
exchange these parts, send the product with a repair order to
SCHUNK or order the housing with the base jaws as a set.

6.2 Maintenance and service intervals

NOTICE

Material damage due to hardening lubricants!

Lubricants harden more quickly at temperatures above 60°C,
leading to possible product damage.

•

Reduce the lubricant intervals accordingly.

Interval [Mio. cycles]

0,5

6.3 Lubricants/Lubrication points (basic lubrication)

SCHUNK recommends the lubricants listed.
During maintenance, treat all greased areas with lubricant. Thinly
apply lubricant with a lint-free cloth.

Lubricant point

Lubricant

Metallic sliding surfaces

microGLEIT GP 360

All seals

Renolit HLT 2

Bore hole at the piston

Renolit HLT 2

Depending on the load, the guides in the housing can be re-
lubricated.

Содержание SPG 100

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды