SCHUNK ROTA THW 1000, Перевод оригинального руководства по эксплуатации, Страница: 44 / 45

Appendix on Declaration of Incorporation, as per 2006/42/EC, Annex II, No. 1 B
44 02.00|ROTA THW / THWB |en
Appendix on Declaration of Incorporation, as per
2006/42/EC, Annex II, No. 1 B
1. Description of the basic safety and health protection requirements, as per 2006/42/EC, Annex I, that apply to and are fulfilled
for the scope of the partly completed machinery:
Product designation
Power chuck with quick jaw change system
Type designation THWB 210-52; 265-71; 315-86; 400-120; 500-128; 630-160
ID number 0800100, 0800101, 0800102, 0800103, 0800104, 0800105, 0800106, 0800107, 0800108, 0800109,
0800110, 0800111, 0800156, 0800157, 0800158, 0800161, 0800112, 0800113, 0800114, 0800124,
0800125, 0800126, 0800140, 0800141, 0800142, 0800143, 0800144, 0800145, 0800146, 0800116,
0800117, 0800127, 0800128, 0800129, 0800118, 0800120, 0800130, 0800131, 0800132, 0800133,
0800134, 0800135, 0800147, 0800148, 0800149, 0800150, 0800151, 0800152, 0800153, 0800154,
0800155, 0800121, 0800122, 0800123
To be provided by the System Integrator for the overall machine ⇓
Fulfilled for the scope of the partly completed machine ⇓
Not relevant
⇓
1.1 Essential Requirements
1.1.1 Definitions X
1.1.2 Principles of safety integration X
1.1.3 Materials and products X
1.1.4 Lighting X
1.1.5 Design of machinery to facilitate its handling X
1.1.6 Ergonomics X
1.1.7 Operating positions X
1.1.8 Seating X
1.2 Control Systems
1.2.1 Safety and reliability of control systems X
1.2.2 Control devices X
1.2.3 Starting X
1.2.4 Stopping X
1.2.4.1 Normal stop X
1.2.4.2 Operational stop X
1.2.4.3 Emergency stop X
1.2.4.4 Assembly of machinery X
1.2.5 Selection of control or operating modes X
1.2.6 Failure of the power supply X
1.3 Protection against mechanical hazards
1.3.1 Risk of loss of stability X
1.3.2 Risk of break-up during operation X
1.3.3 Risks due to falling or ejected objects X
1.3.4 Risks due to surfaces, edges or angles X
1.3.5 Risks related to combined machinery X
1.3.6 Risks related to variations in operating conditions X
1.3.7 Risks related to moving parts X
1.3.8 Choice of protection against risks arising from moving parts X
1.3.8.1 Moving transmission parts X
1.3.8.2 Moving parts involved in the process X
1.3.9 Risks of uncontrolled movements X
1.4 Required characteristics of guards and protective devices
1.4.1 General requirements X
1.4.2 Special requirements for guards X
1.4.2.1 Fixed guards X
11