SCHUNK PPU-E, Сборка и руководство по эксплуатации

Страница: 141 / 148

Spare parts
04.00 | PPU-E | Montage- und Betriebsanleitung | en | GAS 363238/389316
139
10 Spare parts
10.1 Note regarding spare part orders
SCHUNK products are always subject to technical modification and
improvement. To avoid incorrect deliveries, and to order parts
without a part number, always provide the information specified
on the name plate as well as the serial number.
Original spare parts
Use only original spare parts of SCHUNK when replacing spare and
wear parts.
10.2 Wearing parts
The expected life span depends on the respective application,
ambient conditions, load and cycle time.
The information concerning the life span is a guide value.
Wear parts Life span Note
Z-axis guide 50 mio. cycles or 12,000 km PPU-E 15
Replace in production facility only
Y-axis guide 50 million cycles or 15,000 km PPU-E15
Replace in production facility only
Cable set
(Y-axis measuring system
and Z-axis grounding cable) 25 million cycles PPU-E 15
Servicing [ } 129]
Hybrid cable 25 million cycles PPU-E 15
PPU-E 30
PPU-E 50
Replace in production facility only
measuring system
(Y-axis) and (Z-axis)
grounding cable 25 million cycles PPU-E 30
PPU-E 50
Replace in production facility only
Z-axis guide 25 million cycles or 10,000 km PPU-E 30
PPU-E 50
Replace in production facility only
Y-axis guide 25 million cycles or 10,000 km PPU-E 30
PPU-E 50
Replace in production facility only
brake 10.000 cycles PPU-E 15
PPU-E 30
PPU-E 50
Replace in production facility only
Spring 50 million cycles PPU-E 15
PPU-E 30
PPU-E 50
Replace in production facility only