Assembly
20
08.00 | PFH 150- 300 | Assembly and Operating Manual | en | 389270
4.2 Connections
4.2.1 Mechanical connection
Evenness of the
mounting surface
The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length
Permissible unevenness
< 100
< 0.02
> 100
< 0.05
Mounting
The module can be mounted from the front or on the side:
Assembly options
The centering sleeves (4) are included in the enclosed pack.
Size of centering devices (in the enclosed pack)
Item
Mounting
4
Cylindrical pin (2x)
DIN 6325 8.0m6 x 20mm
CAUTION
Damage to the gripper during Assembly, when maximum depth
of engagement of the mountings screws is exceeded.
The maximum depth of engagement when fastening from below
and laterally fastening have to be observed under all
circumstances.
