Basic safety notes
01.03/LPE/en
7
2
Basic safety notes
2.1
Intended use
The unit is to be used only for the application contractually
agreed between the manufacturer/supplier and user.
The unit is intended for installation in a machine/system. The re-
quirements of the applicable guidelines must be observed and
complied with.
The unit may be used only in the context of its defined application
parameters.
To use this unit as intended, it is also essential to observe the
technical data and installation and operation notes in this manual
and to comply with the maintenance intervals.
Any other use or use exceeding that specified is an infringement
of use for intended purpose. The manufacturer bears no liability
for damage resulting from such use.
Use which is not specified as an intended use is for instance
when
•
the unit is used with machines/systems or workpieces that are
not designed to be used with the unit.
•
the unit is operated without protective equipment in
accordance to the EC Machinery Directive.
•
the statutory safety and accident-prevention regulations and
the standards and guidelines valid at the usage site are not
observed.
