Translation of original declaration of incorporation
01.03/LPE/en
21
10
Translation of original declaration of
incorporation
In terms of the EC Machinery Directive 2006/42/EC, annex II B
Manufacturer/
distributor
SCHUNK GmbH & Co. KG.
Spann- und Greiftechnik
Bahnhofstr. 106
– 134
D-74348 Lauffen/Neckar
We hereby declare that the following product:
Product designation:
Linear gantry electric
ID number:
381240
… 381589
meets the applicable basic requirements of the Directive Machinery (2006/42/EC).
The incomplete machine may not be put into operation until conformity of the machine into
which the incomplete machine is to be installed with the provisions of the Machinery Directive
(2006/42/EC) is confirmed.
Applied harmonized standards, especially:
EN ISO 12100-1
Safety of machines - Basic concepts, general principles for design --
Part 1: Basic terminology, methodology
EN ISO 12100-2
Safety of machines - Basic concepts, general principles for design --
Part 2: Technical principles
The manufacturer agrees to forward on demand the special technical documents for the in-
complete machine to state offices.
The special technical documents according to Annex VII, Part B, belonging to the incomplete
machine have been created.
Person responsible for documentation: Mr. Robert Leuthner, Adress: see adress of the manu-
facturer
Hausen, November 2012
Markus Jesser;
Unit Manager, Engineering Design Gripping Systems