SCHUNK KSX-C, Инструкция по установке и эксплуатации

Страница: 26 / 32

_________________________________________________________________________________________
schunk.com XND.00015.012_A – 10/2018 26
7.3 Removing the movable jaw

Remove the turn prevention lock.

Turn the spindle until the movable jaw is free.

Pull the jaw from the base plate.
7.4 Complete dismantling
Removing the spindle

Clamp the KSX-C in order to release the cover plate.

Remove 4 x cylinder screws NK M6 x 10.

Remove cover plate.

Unclamp KSX-C.

Remove the turn prevention lock.

Turn out the inner and middle telescope tubes.

Remove the outer telescope tube.
Attention:
The cover plate is spring loaded. Removing the cover plate in de-clamped position
is only possible with great force!
Removing the mechanical force cassette

Remove 6 x cylinder screws NK M6 x 10.

Remove the cover from the spindle.

Remove the spring washer.

Pull the mechanical force cassette from the fixed jaw.

Remove axial needle cage and washers.
Important:
the mechanical force cassette is spring tensioned and may only be opened by qualified
personnel!
Further dismantling is only possible with special tools.
Please contact your manufacturer if you wish to replace the mechanical force cassette.