SCHUNK KSP plus-BWM Series, Сборка и руководство по эксплуатации

Страница: 8 / 55

Basic safety notes
8 04.00|1151449 KSPplus-BWM, KSP-LHplus-BWM |en
Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
• Use only original spare parts or spares authorized by SCHUNK.
Use of special chuck jaws
Requirements of the chuck jaws
When using special chuck jaws, please observe the following rules:
• The chuck jaws should be designed to be as low as possible.
The clamping point must be as close as possible to the housing
(clamping points further away cause higher surface pressures in
the jaw guides and can significantly reduce clamping force).
• Do not use welded jaws.
• Reduce operating pressure for higher clamping points.
• Mount accessories such as clamping bars or reversible gripping
jaws to the changing jaws with the proper torque (

4,
Page 17) .
Environmental and operating conditions
Required ambient conditions and operating conditions
Incorrect ambient and operating conditions can make the product
unsafe, leading to the risk of serious injuries, considerable material
damage and/or a significant reduction to the product's life span.
• Make sure that the product is used only in the context of its
defined application parameters, (

3, Page 15) .
• Make sure that the product is a sufficient size for the
application.
• Ensure that maintenance and lubrication intervals are
observed, (

8, Page 36) .
• Ensure that the environment is free from ferromagnetic
particles or chips.
Personnel qualification
Inadequate qualifications of the personnel
If the personnel working with the product is not sufficiently
qualified, the result may be serious injuries and significant
property damage.
2.4
2.5
2.6
2.7