_________________________________________________________________________________________
www.schunk.de
XND.00018.002_A – 10/2018
26
7
Removing and replacing parts
7.1
Removal
Disengage both clamping jaws (item 20) from the
drivers (items 40/50) using the opener and turning
the spindle to the left.
Open the vice until the drivers
(items 40/50) can be moved to the side.
Remove the clamping jaws (item 20) from the
tool body (item 10).
Remove the circlip (item 120) if necessary and
turn out the drivers (items 40/50).
120
20
40
50
20
10
30
