General
02.00 | HLM | Assembly and operating manual | en | 389497
7
1.4 Accessories
A wide range of accessories are available for this product
For information regarding which accessory articles can be used
with the corresponding product variants, see catalog data sheet.
1.4.1 Sensors
Overview of the compatible sensors
Size
Designation
Type
HLM 25 - 50
Inductive proximity
switches
IN
HLM 100-200
Inductive proximity
switches
NI
Exact type designation of the compatible sensors see catalog.
1.4.2 Rod lock
The rod lock prevents the drop of the mass in case of energy loss,
such as emergency stop situations. The rod can be fitted
subsequently, but this reduces the effective stroke.
NOTICE
Damage to the rod lock due to incorrect actuation / overload!
•
The rod lock may only be triggered and unlocked when the
product has been shut down.
•
See the data on static holding force in the catalog. The forces
occurring in a clamped condition must not exceed the holding
force.
•
In the event of a dynamic load or overload (e.g. drop in
pressure during movement), the clamping cartridge must be
checked and replaced if necessary.
WARNING
The Rod lock is not a safety component for personal protection
in accordance with the Machinery Directive.
Exact specifications and ordering data
☞
catalog.
