SCHUNK GSM-W 16, Сборка и руководство по эксплуатации

Страница: 48 / 56

Maintenance
48
03.00 | GSM-W | Assembly and operating manual | en | 389108
8.11 Servicing and assembling the module
Maintenance
• Clean all parts thoroughly and check for damage and wear.
• Treat all greased areas with lubricant.
Grease/greasing areas [
}
38]
• Oil or grease bare external steel parts.
• Replace all wear parts / seals.
– Position of the wearing parts Drawings [
}
49]
– Seal kit Sealing kit [ } 7]
Assembly Assembly takes place in the opposite order to disassembly.
Observe the following:
• Unless otherwise specified, secure all screws and nuts with Loc-
tite no. 243 and tighten with the appropriate tightening
torque.
Screw tightening torques [ } 39]