SCHUNK FDB-AC 90, Сборка и руководство по эксплуатации

Страница: 24 / 44

Operating Instructions
24
02.00 | FDB-AC | Assembly and Operating Manual | en | 389513
5.1 General Precautions
WARNING
Neglecting safety precautions can create hazardous situations,
In the worst case, personnel can be injured or the deburring
installation and the FDB-AC can be damaged.
•
It is important that all personnel involved in operation of the
FDB-AC have a thorough understanding of the operating
procedures.
•
The FDB-AC must only be used for robotic deburring
applications. The FDB-AC is a deburring tool only.
•
Never use the FDB-AC for purposes other than robotic
deburring.
Grinding, countersinking or other metal-forming processes should
not be performed by the FDB-AC. It may be dangerous to operate
the FDB-AC for these purposes. If a failure occurs due to forces
caused by improper use, hazardous situations for both personnel
and equipment could be created. The FDB-AC is intended to
perform deburring only.
The FDB-AC should not be used to deburr materials that are prone
to fracture. A fracturing workpiece may result in pieces of material
damaging surrounding working environment and personnel.
Material removed correctly should be in the form of chips.
Reduce the robot velocity when the workpiece and the FDB-AC are
making initial contact. Making the contact movement between the
FDB-AC and the workpiece too fast may in some situations result
in a collision. Collisions may create hazardous situations for both
personnel and equipment.
When performing maintenance, always remember to tighten nuts
and bolts thoroughly and
use a removable thread lock adhesive.
When replacing burrs, always attach the burr correctly.
Replacement of Burrs [
}
37]
WARNING
Never use the FDB-AC as a hand-held machine.
In order to increase the life of the FDB-AC motor and bearings,
always use proper lubrication.
Lubrication [
}
36]