Commissioning
26
03.00 | CLM | Assembly and operating manual | en | 389015
5 Commissioning
• Check the technical specifications
16].
• Do not use the product until trouble-free operation has been
checked, taking all permissible operating parameters into
account.
• The speed of movement must be regulated via throttle check
valves
17]. The speed is always set so
that it starts at a low speed and increases to a higher speed
until the desired operating speed is reached.
CAUTION
Risk of mechanical damage of the product!
Theproduct must always be adjusted so that no mechanical
impacts are produced when reaching the end position.
