Maintenance
18
03.00 | AGE-XY | Assembly and operating manual | en | 389007
6 Maintenance
6.1 Maintenance interval
CAUTION
Material damage due to hardening lubricants!
Lubricants harden more quickly at temperatures above 60°C,
leading to possible product damage.
•
Reduce the lubricant intervals accordingly.
Interval [Mio. cycles]
13
6.2 Lubricants/Lubrication points (basic lubrication)
SCHUNK recommends the lubricants listed.
During maintenance, treat all greased areas with lubricant. Thinly
apply lubricant with a lint-free cloth.
Lubricant point
Lubricant
All seals
Sealgood 1
Centering piston
Toothgood 2
CAUTION
Do not grease the sliding surface between the accumulator
piston (3) and compensation body (8)! The O-ring (28) must be
free from grease!
(Position of the item numbers
