Assembly
5 Assembly
5.1 Basic information
WARNING
Risk of injury due to incorrect assembly of the clamping pins.
If the clamping pins are assembled incorrectly, the product may
be flung out during rotation, causing severe injuries.
•
Observe the specified tightening torques for the clamping
pins.
•
Regularly check the fastening of the clamping pins.
•
Take suitable protective measures to secure the danger zone.
•
Wear suitable protective equipment.
WARNING
Risk of injury if the product falls during transport, assembly or
disassembly.
Due to the oily surface required to preserve it, the product can
slip through your hands, resulting in injury.
•
Take appropriate safety measures to prevent the product
from falling.
•
Wear suitable protective equipment, especially protective
gloves and safety boots.
CAUTION
Risk of crushing and impact when assembling and disassembling
the clamping pins.
•
Do not reach in between the product and the clamping pins.
•
Wear suitable protective equipment.
NOTICE
Possibility of material damage due to clamping pins of different
lengths.
If the wrong clamping pins are mounted, a large imbalance and
an inaccurate turning result can occur during turning.
•
Ensure that the height difference between the clamping pins
is less than 3 mm.
15
02.00 | Jaw turning rings | Assembly and Operating Manual | en | 0189701
